Solo Stove : A Blazing Master For Backyard Bonefire 2024

solo stove

Introduction To Solo Stove:

Introduction To Solo Stove

Solo Stove , a popular wood-burning fireplace, promises to solve campfire problems by offering a portable and safe place to build a fire quickly and easily. It can be used in the backyard and while camping. Continue reading if you are considering buying one, but would like to learn more. After testing the Solo Stove Bonfire over a period of 3 months to determine if it was up to par with its hype. It performed better than we expected.

Table of Contents

Perks Of Having A Solo Stove:

Perks Of Having A Solo Stove

Sitting around a campfire with friends and family on a warm summer evening is one of the best activities to do during the summer. It’s magical to sit around a fire, whether you have a campfire on your driveway or one in a pit at the campsite. Even though a summer campfire is usually a pleasant experience, it can have its downsides. Smoke in the eyes, a chill to the air, and a smell that gets into your hair and clothes are all problems. Learn how a Solo Stove solves these issues.

It’s Perfect For Backyard Fire:

It's Perfect For Backyard Fire

Solo Stove has a line of innovative products that are perfect for those who love to have backyard fires, but don’t want to deal with the problems listed above. The brand Solo Stove offers a range of efficient and sophisticated fire pits, camping stoves and grills. All of them use a patented design for airflow that allows wood to be burned more efficiently and with no smoky odor.


What makes the Solo Stove unique?


Solo Stove is not just one product. It’s a brand that has a wide range of unique and innovative apparatuses for burning wood. Solo Stove products, from camp stoves to fire pits, are all built with an airflow design which makes them stand out among other backyard wood burning devices.

360deg Degree :

360deg Degree

This feature is what makes the Solo Stove unique. It’s Signature 360deg Design. Air is drawn into the stove from the bottom by strategically placed holes at both the top and bottom. A double-wall construction allows air to enter the stove. The preheated oxygen is then blown through the holes at the top to feed the flames.

Also Read about: Blendjet

Secondary Combustion:

This secondary combustion and increase in airflow is extremely efficient, producing a lot of heat and very little smoke. It also produces a nice, warm fire. It is a lot of fun to watch this method of burning wood. Even better, the Solo Stove will burn for many hours and leave a very small amount of ash.

Smokeless:

As previously mentioned, the Solo Stove’s unique airflow design makes it virtually smokeless to sit around a fire pit in your backyard or a campfire. Airflow is circulated through the holes at the top and bottom.Smoke is not emitted from the stove, but only forms part of its airflow.

Solo Stove parts :

The Solo Stove is made up of many different components, each with a vital role to play in its operation.These parts have been designed to maximize the air flow, and heat output when burning wood. These parts make cleaning your Solo Stove camp stove or fire pit a breeze.

Principle Of Stove:

Principle Of Stove

The Solo Stove fire pit and stoves are both designed using the same principle. Each comes in different sizes, but they all perform the exact same function with the same efficiency using the same basic components. The only difference between a campfire and a firepit is that they have slightly different purposes. The main difference is that the camp stove has a part which allows you to boil or cook water on top, while fire pits don’t.

Burn Chamber:

This is the main body part of the Solo Stove.The top and bottom of the vents are both equipped with holes.The walls of this chamber are made of double-layered 304 stainless steel. Other parts of the Solo Stove are found in the burn chamber. It also holds the wood that is being burned.

Base Plate :

 Base Plate

The base plate can be found near the bottom of your chamber.The wood is placed directly onto the base plate to burn. The bottom vent holes of the baseplate allow oxygen from the top to reach the embers directly, allowing the fire to burn hotter and faster. The holes in the base plate allow the ash from burning logs fall out, and do not block the combustion process. This part is called the nichrome grate on the camp stove.

Ash Pan :

Ash Pan

The ashpan serves two purposes. It catches the loose ash that falls from above. The ash is kept out of the airflow, which is crucial. The ash pan acts as a barrier to prevent heat from destroying the ground beneath the stove.

Vent Holes:

Vent Holes

Solo Stove has vent holes that are unique to it. They make the product stand out from other fire pits.Both the top and bottom of your stove has two vent holes. The bottom vent holes are used to pull in air as the combustion process consumes oxygen and hot air. Pre-heated air is then fed into the upper vents to feed the flame at top of fire. This allows for a hotter, cleaner fire.


Fire Ring :

On fire pits, it’s a fire ring. On cook stoves, it’s a cooking circle. Both pieces are used to direct heat upwards and keep the fire even and centered. The windscreens also prevent flames and smoke from blowing. The cooking and fire ring can easily be removed from the burner chamber and placed inside. Two hooks are located on the cooking ring for holding pots or accessories when heating food or hot water.

Solo Stove Fire Pits:

Solo Stove’s line of firepits was designed for residential and backyard use. They are portable and can be used on the beach or while camping. Each Ranger and Bonfire comes with a carrying case that has handles to make transporting it easier.

Solo Stove offers different models:

Solo Stove offers different models
  • The Mesa (also known as Ranger)
  • Bonfire
  • Yukon

Double Wall Design:

Double Wall Design

All models are designed with the same double-wall design for maximum heat with minimal smoke. Only their size is different. Each of us has a different idea about what a backyard firepit should be. You can choose the size that you like, and it will depend on how many people you plan to have around the fire, whether you want the fire pit to be portable or how much storage space you have.

What is a Solo Stove Bonfire Fire Pit?

What is a Solo Stove Bonfire Fire Pit

The Solo Stove Bonfire has been designed for durability, portability and smokeless burning. The 304 stainless steel construction provides a high level of strength, while also providing resistance to corrosion and rust. The dual-wall design, along with the slightly elevated fire grates, dramatically improves the airflow. This reduces smoke during the burning process and eliminates the need to clean out ash or charcoal.

Solo Stove has similar-looking fire pits:

  • The Ranger
  • Yukon
  • Bonefire

Weight Of The Solo Stove:

The Solo Stove Bonfire, a midsize model measuring 19.5″ in diameter by 14″ high is ideal for five people to comfortably sit together. The Solo Stove Bonfire weighs only 20 pounds and is easy to transport to the beach, camping or tailgating. Turn the firepit over when the fun has ended and the fire is out to remove the cold ashes. Store the fire pit away from the weather.

Pricing Of Solo Stove:

The Bonfire is under $300 including the carry bag and stand. This price is higher than many wood-burning, low-quality fire pits. Most built-in firepit kits cost between $150 and $500, but require installation in a permanent place and laborious assembly. Bonfire is the best option for most users because it offers convenience, durability and comfort. The Solo Stove Bonfire, in my opinion, is worth the price.

Accessories With Solo Stove:

Accessories With Solo Stove

The Bonfire Base Package includes a fire pit made of one piece, a flame ring as well as a heavy-duty drawstring carrying bag. The unit is tested included two accessories: A stand that makes it safer to place on heat-sensitive surfaces and a heat reflector which directs the warmth of the fire toward people sitting nearby.

The following Solo Stove Bonfire Accessories are available separately:

  • Shield protects against flying sparks .
  • When not in use, the soft cover will keep rain and debris from entering your fire pit.
  • The lid converts the firepit into a table.
  • Handle for easy one-handed transportation .
  • Station – to neatly store firewood and the firepit.
  • Fire pit tools – help users maintain the fire.

Burns Types Of Solo Stove:

Primary Burn:


Combustion is what starts the flame when you ignite a quality fuel. Primary Burn is a technical term for “burning”.

360deg Airflow :

The term “Signature 360deg airflow technology” describes what happens between the walls and Solo Stove Fire Pit. This is the key to a smokeless, hot flame that will last. This is how it works. To encourage this process, all Solo Stove Fire Pits have double-walled construction and two sets of holes for burning. Your fire pit’s exterior burn holes will be at the bottom, while the interior burnholes are at its top. 360deg Airflow performs two functions as it flows through the walls of your fireplace.

Process Of Burning:

First: air is drawn through the lower holes to enter the chamber beneath the base plate and fan the flames. The incoming air will cause your flame to grow and heat up due to its constant feeding.

Second: The Secondary Burn occurs, which is where the magic of smokeless combustion begins.

Secondary Burn :

Secondary Burn

Secondary burns occur near the top of the Solo Stove burn chamber. The upper vents along the inner surface of the camp stove or fire pit blast the fire with heated oxygen. This creates a hotter, more beautiful fire and burns off smoke. This is all possible because of our Signature 360deg Design(tm).

What is the process?

As soon as you light the Solo Stove, a vacuum is created. Rising hot air, and the lack of oxygen caused by combustion, create a vacuum in the Solo Stove burn chamber. This vacuum pulls oxygen into the Solo Stove through its exterior vent holes located at the bottom or the camp stove. The fire is immediately fueled.

Double Walls Allow Additional Oxygen:

Double Walls Allow Additional Oxygen

The double walls of the Solo Stove also allow for additional oxygen to travel through them. The preheated oxygen is then injected through the interior vents into the top of fire, further igniting the flame. The result is the desired secondary burn, which makes a Solo Stove so captivating and fun to gather around.

How do you get secondary burns?

Do not stack firewood or twigs over the upper vents on the Solo Stove. If you don’t block the holes, the air will be able to reach the highest temperature and burn the smoke off before it leaves your Solo Stove.

Principle Of Flame Ring:

The flame ring of your fire pit is important. The flame ring of your firepit should be facing upwards. (The ring’s taper should point towards the interior of your firepit). The flame ring is designed to direct the smoke-burning secondary fire towards the Solo Stove’s interior. The upper vent holes are blocked if the flame ring is upside down.

Steps For Mesmerizing Burn:

Follow these tips to ensure that your Solo Stove produces a burn that’s not only mesmerizing, but also a pleasure to enjoy while making memories:


Burn Notice :

The Solo Stove Bonfire is so efficient that I thought I would burn through the wood too fast, but was pleasantly surprised when I found out it didn’t. It burns so efficiently that every log produces heat and flame until the coals are small. It felt more efficient than the old fire pit I had because I didn’t have to add wood every time to make it feel like a fire. The Solo Stove has some wear, but it’s expected.

Color Change Due To Burning:

Color Change Due To Burning

The color of some areas is yellowed from smoke and heat. And the grate looks a bit blackened, but it’s structurally fine. I’d expect to have to replace the grate about every two years, but I think that Solo Stove Bonfire will last a long time.

No water is needed:


The Solo Stove Bonfire’s updated design makes cleaning much easier. Wood sits on perforated surfaces that let air in and allow ash to fall through. An ash pan at the bottom of your stove collects everything that falls through the holes. Do not pour water on the Solo Stove when it is hot. Also, do not dump sand onto the fire. Let the fire burn down to the ash and then dispose of it. This process can take hours so plan accordingly or accept the mess.

Pros And Cons Of Using Solo Stove:

PROS:

  • Durable construction in 304 stainless steel
  • Fast, easy and simple to light
  • Bright flame
  • Burns almost smoke-free
  • It does not leave much ash behind


CONS:

  • Burns firewood more quickly than other fire pits
  • It is a bit cumbersome to empty out the ash
  • Cover the device when not in Use

How easy is it assemble the Solo Stove Bonfire?

How easy is it assemble the Solo Stove Bonfire

Assembly of the Solo Stove Bonfire Fire Pit could not have been simpler. The fire pit is made of one solid piece. Place it on a level, safe surface that is at least six feet from any combustible materials or structures. Allow 20 feet clearance above the fire pit. The base can be made of sand or dirt, but also pavement.

Use Stand In Temperature Sensitive Areas:

Use Stand In Temperature Sensitive Areas

If you plan to set it up on a temperature-sensitive surface like a wooden deck or grassy area, be sure to buy and use the stand. The stand is a simple steel mesh ring which elevates the firepit about 4 inches above the ground. The fire pit body is now in place. All that’s left is to attach the flame ring to the rim.

How to start a bonfire with a single stove:

I lit my bonfires just like I would any wood-burning fire pit. I used a generous amount tinder and kindling to start the fire, then added large pieces of firewood to provide long-burning fuel. Use commercially available fire starters.The Bonfire can accommodate firewood up to 16-inch lengths, but 12-inch-long logs seem to work best. The shorter logs were easier for me to place and filled the chamber more efficiently.

Can you use a Solo Stove Bonfire on a deck?

Can you use a Solo Stove Bonfire on a deck

By itself, the Solo Stove Bonfire should not be used on flammable or temperature-sensitive surfaces.To set it up, you need to protect the deck from heat. Solo Stove Bonfire Stand is the fastest and easiest way to achieve this. The stand comes with some Bonfire packages, but it can also be purchased separately. The stand was used to set up the Bonfire in a corner on my lawn. I didn’t use it on my deck. After a three-hour fire, there was no damage to my grass.


How much heat is produced by a Solo Stove Bonfire?

The Solo Stove Bonfire produces a great deal of heat. It produces more heat because of the same design features which make it more efficient and cleaner than other firepits. The air flowing up between the walls, and underneath the elevated fire grates, allows the fire to consume the wood more efficiently.

Time For Woods To Get Burn:

It took between 5 and 10 mins to get the fire to the point that could add firewood logs of full size. Once it had filled the chamber to its capacity, the fire burned for about 2.5 hours before it needed to add any more wood.

Due to the long burn time and efficiency of the Solo Stove, users need to consider two key issues:

  • Fire pit safety
  • Heat deflection

Cautions Around Fire Pit:

If the heat is lost to the atmosphere, it doesn’t mean as much. It may be okay in the summer, but when it’s cool, you need to capture that heat for a cozy fireside experience. The heat deflector, a saucer-shaped stainless steel device, is placed on the edge of the fire pit. It directs the rising heat away from those sitting nearby. It is important to be cautious around the fire pit.

Should Have Space Between pit And Sitting:

Should Have Space Between pit And Sitting

It is important to remove any trip hazards from the area, and to allow enough space between the fire pit seating and the stainless steel side. After the fire has started, let it burn completely. If necessary, the Solo Stove can be moved after the fire is completely out.

Tips to make a smokeless fire:

1- Dump out the ash:

Dump out the ash

You don’t have to empty the Solo Stove’s ash pan after each burn. However, starting your fire pit with an ash pan that is empty will ensure you get great airflow. This is a simple step, but one that makes a big difference.

Tipping The Fire Pit:

Tipping your fire pit over will allow you to dump the ash. Shop Vacs will work if you can’t tip your fire pit over. Be sure to move your fire pit away from the edge of your campsite or yard.

Ash can be messy:

You can put your ash in an outdoor trash bag if you don’t know where else to dispose of it. Ash can be used in many ways around the home! Learn more by visiting this blog.

2-Start small :

Start your fire using a lighter and dry kindling. Use small twigs, chunkwood or a hatchet for splitting up your Juniper Firewood. Do not add larger logs before you have created a good ember bed. The ember bed will help the Solo Stove’s double walls heat up and allow you to get a secondary burn, which helps reduce smoke faster.

3-The best wood to use for firewood :

The best wood to use for firewood

Super dry hardwood is the best kind of firewood to use with your Solo Stove. Dry firewood will ensure that your fire starts easily and burns beautifully.

4- Don’t use too much wood :

Don’t allow your firewood to rest on the flame rings. Keep it below the secondary burning holes. Our Signature Airflow DesignTM will bring oxygen to every part of the wood to create a super-efficient burning.

5- Mix It Up!

Use some fire pit tools to stir up the wood and bring oxygen back to your fire if it starts to go out. Our Fire Pit Tools allow you to do this without ever leaving your chair.

What is the best Solo Stove Bonfire Fire Pit for you?


It is easier to carry, lighter, cheaper, and more versatile thanks to the numerous accessories. If you need a bigger or smaller firepit, the sister models of the Bonfire are worth a look. The Solo Stove Ranger is 15 inches wide and 12.5 inches tall.The larger Solo Stove Yukon measures 27 inches in width and 17 inches in height. They all share the same smokeless design with heavy-duty stainless steel construction.

FAQs :

Where can I light a bonfire?

You can use it for a bonfire in your backyard or take it with you camping.

What can I cook over a bonfire?

The Bonfire wasn’t designed to be used for cooking. The Bonfire is designed for use in the backyard to create a fire feature. Feel free to use hot dogs or marshmallows on sticks!

What’s the difference between Solo Stove Lite Titan and Campfire?

The Solo Stove Lite Titan or Campfire stoves were designed to be lighter and more portable for backpacking and camping. The Bonfire is designed for use in the backyard to create a fire feature. The Bonfire is a backyard fire pit that’s unlike any other. It was not meant to be portable like our other stoves.

What types of wood do you recommend as a fuel?

All firewood will burn, but we recommend hard woods that are dry for maximum efficiency. Hardwoods like birch and maple will burn for longer than softwoods. How many logs do I need? Use 4-6 logs of average size. Do not overfill your bonfire. You can always add more logs once you’ve got a bed of hot embers.

How do I store and clean my bonfire?

Turn your bonfire upside down after it cools to remove any ash that may remain in the stove. When not in use, keep your Bonfire cool and dry. So easy!

Can I use my bonfire when it is hot?

YES! When the bonfire is in use, do not touch it. It will be very hot. Always supervise children when they are around the bonfire. Treat the bonfire as you would any other fire.


Conclusion:

conclusion


A campfire can be a wonderful way to relax with friends and family. Before that can happen, you have to find a suitable location and then put in a lot of effort to build the campfire. After completing these tasks, the relaxing atmosphere is achieved, but unfortunately it’s often accompanied with copious amounts drifting smoke.Solo Stove claims to offer a better experience.

Leave a Reply

Your email address will not be published. Required fields are marked *